Settings
The Settings menu is accessible from the main screen by clicking the gear icon:
It gives access to the functional settings of the MindBox, such as sound volume, screen brightness, transfer mode, and factory reset.
Volume
Clicking on the “Volume” option brings up a three-button interface. The side buttons adjust the current volume: the “-” button on the left to decrease it, the “+” button on the right to increase it.
There are five sound levels; the minimum setting will mute the MindBox.
Once you're satisfied with the volume, validate with the green button in the center. You will return to the general “Settings” menu.
Brightness
Like the “Volume” menu, you’ll find three buttons in the “Brightness” menu. Use the left button to decrease screen brightness, and the right one to increase it.
The center button confirms your selection.
Transfer Mode
Clicking this option brings up a confirmation screen. If confirmed, the MindBox switches to Transfer Mode. To cancel and go back, click the arrow in the bottom-left corner.
To exit Transfer Mode, /////// euuuuh comment on fait pour quitter le mode transfert ?
Factory Reset
Clicking this option brings up a confirmation screen. If confirmed, the MindBox will return to its initial state. All subjects, protocols, and results will be erased.
To cancel, click the arrow at the bottom left.
Factory reset is permanent
Enabling this option will erase all data stored on the box. Make sure to back up any important files first.
You can re-import your subjects and protocols after the reset, just like with a new MindBox.