Connect
Connecting the MindBox to a computer is easy. It works through a WiFi network generated by the MindBox itself.
Connection
MindBox Transfer Mode
To activate transfer mode, go to the Settings menu and click on the "Transfer" option, represented by the following icon:
The MindBox will then emit a WiFi signal, which other devices can detect.
Connecting the Computer
Enable WiFi on your computer. In the WiFi settings, you will see a network named "MindBox_XXXX" (where the four Xs are a unique sequence of letters or digits identifying your device). Click on it and enter the following password: "admin_MindBox_XXXX" (replace the Xs with the specific ID of your MindBox).
After a few moments, the computer will be connected to the MindBox. You may receive a notification stating that the device is not connected to the Internet — you can ignore it.
Data Transmission
Launch the MindRun software on the PC connected to the MindBox. It will automatically detect the connected MindBox.
Detailed Explanation
You can find a full guide on the MindBox - MindRun connection here.
Protocol Import
Create your subjects in MindRun (see the full software guide here).
In the “MindBox” tab, add the desired subjects and assign protocols to them. Finally, click the “Upload setup” button to configure the MindBox with your settings. The MindBox is then ready to use.
For detailed information about protocol creation, refer to the MindDev documentation. /////// on a une documentation MindDev ?
Results Synchronization
Simply click the “Retrieve files” button in the “MindBox” tab. If the MindBox is connected and compatible results are available, they will be imported into MindRun and accessible from the “Results” tab.